Mark Cameron Yachts

Nauticat 35

£68,000

Nicely presented Pilothouse cruising yacht


Overview

Available

Lying: Craobh Marina, Argyll, United Kingdom

General Information

Manufacturer/ModelNauticat 35
NameMARY BEE
DesignerKaj Gustafsson
Year1987
CategorySail
New or UsedUsed
Sale StatusAvailable
Price£68,000
LyingCraobh Marina, Argyll, United Kingdom
Reference2733569

Specifications

LOA10.64m
LWL9.04m
Beam6.45m
Draft1.68m
Displacement7484kg
Hull ConstructionGRP
Keel TypeFin Keel

Propulsion

EngineVolvo Penta 2003T 43hp 3 cylinder, turbocharged, indirectly cooled Volvo Penta reversing, mechanical marine gearbox Single lever engine controls at both helm stations Oil pressure, Water Temperature, Amp and Volts Gauges for RPM, Oil Pressure, Water Tempe
Fueldiesel
Fuel Capacity320l

Accommodation

Drinking Water Capacity450l

Description

Nauticat built their reputation with solidly built and well-finished motorsailers which motored better than they sailed. Alongside this, they also built a range of ‘Pilothouse Sailing Yachts’ aimed at the sailor wanting the protection of a wheelhouse without compromising the sailing performance of their yacht. The pilot house range retains the solid build and high-quality finish above and below decks while being designed with sail power as the primary mode of propulsion.

With her current owners since 2018 the Nauticat 35 MARY BEE has proven to be well suited to short-handed sailing in Scottish water with the pilot saloon allowing her crew to enjoy the fabulous scenery even in a poor summer. Lying afloat and ready for viewing her inventory highlights include:

Original gelcoat finish to topsides
Coppercoat antifouling below the waterline
Dual helm stations
Volvo Penta 2003T (43hp) marine diesel engine
Adverc alternator controller
Victron 230VAC – 12VDC battery charger
Rope cutter
SidePower tunnel mounted thruster
Raymarine autopilot system
Raymarine ST60+ navigation instruments
Raymarine C120 Classic MFD providing radar and chart plotter
AIS Transponder (2019)
Roller reefing genoa and mainsail
Seago Cruiser, 4 person cannister liferaft
McMurdo E3, 406Mhz and 121.5Mhz
Sprayhood, Owen Sails (2019)

On her berth in Craobh Marina the Nauticat 35 MARY BEE is available for immediate viewing.

OWNER’S COMMENTS:
"Mary Bee is very easy to manage short-handed, rigged with a non-jamming behind the mast reefing system, and a bow thruster for tight marina situations. She is a very secure boat and goes well on all points of sail, cutting through challenging seas with an easy non-slamming motion as befits her S and S derived design. I was in the process of returning the external woodwork to its natural finish, all of it is solid. Sadly we have to sell her as we can no longer carry on sailing."

CONSTRUCTION

Hull Construction:
Single-piece GRP moulding
Hand-consolidated laminate
GRP moulded structural frames and stringers
GRP engine beds with steel inserts to take engine mounts
Plywood bulkheads, finished with a teak veneer, fully bonded to hull and deck
Original gelcoat finish externally with white topsides and blue style stripes
Underwater hull finished in CopperCoat, applied 2014

Deck & Superstructure Construction:
Single-piece GRP moulding incorporating superstructure and cockpit
Reinforced in the way of deck fittings
Anodised alloy toe rail along deck edge, bolted through hull to form hull to deck joint
Windows of toughened safety glass in anodised alloy frames
White gelcoat finish to moulding
Laid teak decking panels to finish fordeck, side decks, coachroof top, cockpit sole and seating

Keel & Rudder:
External lead ballast keel, fin profile
Acid-proof keel bolts
Skeg hung, semi balanced rudder
GRP construction
Stainless steel stock and internal structural frame work

MACHINERY

Engine & gearbox:
Volvo Penta 2003T
43hp
3 cylinder, turbocharged, indirectly cooled
Volvo Penta reversing, mechanical marine gearbox
Single lever engine controls at both helm stations Oil pressure, Water Temperature, Amp and Volts
Gauges for RPM, Oil Pressure, Water Temperature and Amps

Maintenance & Performance:
Engine last serviced summer 2023
Gearbox replaced previously with later modified spline type
All seacocks below the waterline replaced in previous ownership
Cruising speed under engine 6kts

Propulsion & Steering:
Stainless steel propshaft
Volvo Penta type dripless sterngland
Rope cutter
3 blade, bronze fixed propeller
Hydraulic wheel steering system with dual stations
Wheel steering at both helm stations

Bow Thurster:
SidePower tunnel mounted thruster
Joystick type controller on cockpit pedestal

Autopilot:
Raymarine autopilot system
Raymarine ST6002 control head at lower helm
Raymarine SmartContoller remote control
Raymarine Course Computer
Raymarine hydraulic drive system

ELECTRICAL SYSTEMS

Voltage systems:
12VDC onboard power system
230VAC shore power system

Shore Power System:
Extension lead to connect to shore supply
Single 16 amp connection point
Hardwired RCD-protected system
3 pin UK sockets, battery charger, immersion heater

Battery Banks:
Engine Battery – 1x 12VDC, lead acid
Domestic Battery – 2x 12VDC, 140Ah, Varta lead acid batteries (2019)

Battery Monitor:
NASA BM2 battery monitor

Charging:
Victron 230VAC – 12VDC battery charger

Alternators:
Single engine mounted alternator, 12VDC, 50amp
Adverc alternator controller

Other Electrical:
12VDC charging socket at helm station
Windscreen wipers for all 3 forward facing windows
Horn

PLUMBING SYSTEMS

Fresh Water:
Pressurised hot and cold water systems
Mixer tap in galley
Hot and cold taps in forward heads with dedicated shower fitting
Hot and cold taps in aft cabin
Hot water provided from calorifier, heated by engine cooling water or 230VAC immersion heater

Black Water:
Holding tank for aft heads
Tank discharging overboard

Bilge Pumps:
Manual Bilge Pump
Electric Bilge Pump

TANKAGE

Fuel:
Twin diesel tanks
Approximate capacity 160ltrs each
Combine total capacity 320ltrs

Fresh Water:
Twin fresh water tanks
Approximate total capacity 450ltrs

Holding Tank:
Single holding tank, plumbed to aft heads
Stainless steel tank construction

Tank Monitoring:
Gauges for both fuel tanks above helm station
Water tank gauge mounted at aft end of galley

NAVIGATION & COMMUNICATION EQUIPMENT

On Deck:
Plotter – Garmin 276CX potable plotter with pedestal mounting
Depth/Speed/Log – Raymarine ST60+
Wind – Raymarine ST60+
Electronic Compass – Raymarine ST60+
Rudder Position Indicator
GPS – Shipmate RS5500 repeater
Magnetic Compass – Suunto pedestal mounted

At Chart Table:
Plotter/Radar – Raymarine C120 Classic MFD with 2kw mast mounted radome scanner
AIS Transponder (2019)
Clock and Barometer

Communications Equipment:
DSCVHF – Silva S15 DSC VHF
SSB – Sealord 1 Marine Band SSB receiver

DOMESTIC EQUIPMENT

Galley:
Stove – MobiLife gas cooker – 3 burner and oven, gimbal mounted
Fridge – Top loading built-in fridge with Frigoboat 12VDC compressor and chiller plate
Double stainless steel sink
Mixer tap

Heads:
Forward Toilet – Lavac manual marine toilet
Wash hand basin
Mixer tap
Aft Toilet – Lavac manual marine toilet
Wash hand basin
Mixer tap with dedicated pull out shower head fitting

Lighting:
Overhead and bulkhead mounted lighting throughout
Locker lighting in hanging lockers
Reading lights in cabins
All lights fitted with LED bulbs

Entertainment:
Pioneer radio/CD head unit
Speakers in saloon

ACCOMMODATION

Summary of Accommodation:
Double cabin forward
Linear galley
Forward heads with shower
Pilothouse saloon
Master cabin aft with en-suite heads

Accommodation Finish:
Joinery work below decks of high-quality teak constructed of veneered plywood with solid teak trims
Varnished satin finish to all joinery work
Soles of traditional teak and holly styling, finished with varnish
White laminate worktops with varnished teak fiddles and trims in galley
Laminate finish to bulkheads with varnished teak trims in heads
GRP moulded base module with head furniture and tiled sole in heads
Headlining in white textured panels with varnished teak trims between

Description of Accommodation from Forward:

Forward Cabin:
Forward cabin accessed through forward end of galley
Two single berths in V configuration
Hanging locker outboard aft to port
Selection of lockers running the length of the berth outboard to port and starboard
Access to anchor windlass solenoid in forward locker
Bin type storage under the bunks
Opening deck hatch
Drawers beneath aft end of starboard berth
Jack’n’Jill access to forward heads aft to port

Galley:
Linear galley to starboard
Laminate worktop with varnished teak fiddles throughout
Double stainless steel sink forward with mono-block mixer tap
Gimbal-mounted gas cooker, aft of sink
Top loading fridge under aft section of worktop
Selection of lockers for galley storage outboard of worktop
Pantry locker with four wire cage drawers opposite the galley to port
Under cooker storage/drawers/under sink storage
Under sole access to bilge

Forward Heads:
Opposite galley to port
Jack’n’Jill en-suite access for forward cabin via secondary forward door
Inboard facing manual marine toilet at aft end of compartment
Small counter top with wash hand basin forward, outboard
Vanity unit outboard of countertop
Storage locker beneath the counter top

Pilothouse:
Open plan saloon and nav station
Excellent visibility from pilot house windows
Internal helm station to starboard with full internal helm station and single lever engine controls
Swivelling removable helm seat
Countertop outboard of helm to staboard, running aft
Ships switch panel outboard of helm seat
Hanging locker aft at companionway steps to aft cabin
Wrap-around U-shaped saloon seating to port
Removable saloon table mounted on fixed-height legs
Large storage lockers under seating and behind the backrest
Windscreen wipers on all three forward windows
Roof hatches with visibility of sails for when sailing from Pilot House
Companionway steps to cockpit
Under sole access to engine room and battery box
Curtains fitted for windows port and starboard with roll down screens for forward windows, all new in current ownership

Aft / Master Cabin:
Standing room at forward end of cabin
Hanging locker forward outboard to starboard
U-shaped bunk extending across aft end with larger double section to port
Forward end of bunk cushion to starboard creating a seat.
shelve running the length of the bunk outboard to starboard
Shelve spanning width of bunk across the transom aft
Storag unit outboard of bunk to port with 3 lockers and shelve above
Bin type storage lockers beneath bunk with access to steering gear
Opening portlights port and starboard
Curtains fitted for all portlights outboard and aft
En-suite head

Aft Heads:
Inboard facing manual marine toilet at aft end of compartment
Small countertop with wash hand basin forward, outboard
Dedicated showerhead
Vanity unit outboard of wash hand basin
Storage locker beneath countertop

DECK EQUIPMENT

Rig:
Deck stepped, single spreader masthead sloop rig
Anodised alloy mast and spars
Mast section reported to be of larger section than standard for roller reefing mainsail system
Stainless steel standing rigging
Rotostay roller reefing system on forestay for genoa
Behind the mast roller reefing mainsail
Twin spinnaker poles
Block and tackle kicker
Midboom mainsheet

Winches:
Primary Winches – 2x Lewmar 46 self-tailing, two-speed
Secondary Winches – 2x Lewmar 40 self-tailing, two-speed
Mainsail Reefing Winch – 1x Lewmar 16 self-tailing, two-speed
Mast Mounted Halyard Winch – 1x Barbarossa 30 self-tailing, two-speed

Sails:
Genoa – Roller reefing
Mainsail – Roller reefing

Canvas Work:
Sprayhood – On stainless steel frame with stainless steel grabrail aft of hood. Owen Sails (2019)
Pedestal cover

Anchoring & Mooring:
Bower Anchor – 16kg CQR style plough anchor on chain rode
Kedge Anchor – Danforth type anchor, stowing on aft rail to port
Mooring Warps – Selection
Fenders - Selection

General:
Alloy toe rail running length of deck edge
Single bow roller
Stainless steel pulpit and pushpit rails
Toe rail mounted stainless steel stanchions
Double tier stainless steel guard wires running around forward deck
Two fender baskets mounted on grabrails, forward to port and starboard (2020)
Guard rail gates port and starboard
Fixed teak guard rail running around aft deck with lower stainless steel wire guardwire
Anchor locker accessed from opening deck hatch forward
Alloy, deck mounted mooring cleats forward, midships and aft
Windlass deck mounted after of anchor locker, chain self-stowing in locker
Gas bottle storage in anchor locker
Dorade box ventilators forward of mast with stainless steel rail to protect from flying sheets
Teak grab rails on outboard edge of pilothouse
Moulded cockpit seating module port and starboard forward with mouled backrests, topped with teak capping and grabrail
Primary winches mounted on coaming tops aft
Folding cockpit table mounted on pedestal
Mug rack mounted on pedestal
Removeable central section of seating aft of helm
Outboard storage bracket to port side of aft rail
Liferaft mounting in cradle mounted to starboard side of aft rail
Transom mounted boarding ladder

SAFETY EQUIPMENT:

Geeral note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.

Navigation Lights:
Low-level navigation lights – LED Bulbs
Steaming light
Masthead anchor light

Life saving:
Liferaft – Seago Cruiser, 4 person cannister raft
EPIRB – McMurdo E3, 406Mhz and 121.5Mhz
2x Horseshoe buoy – one with light
Danbuoy
Gas Alarm – Vetus system
Carbon Monoxide tester

DISCLAIMER
In this case we are acting as brokers only.
The Owner is not selling in the course of a business. whilst every care has been taken in their preparation , the correctness of these particulars is not guaranteed. The Purchaser is strongly advised to check the particulars and where appropriate at their expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability for such engine on our part.
This vessel is offered subject to prior sale, price change, or withdrawal without notice

Enquire about this Boat


    Available to view by appointment.

    Please note all our listed yachts are privately owned and located in the owner's home port or marina. Due to the varying geographical marina locations of our yachts and the subsequent travel time and distances involved, please only make travel arrangements to view if actively considering purchase.

    Office Hours Mon- Fri 08.30 – 18.00
    Saturday & Sunday by prior appointment

    For more information or to arrange an appointment please contact Mark Cameron Yachts

    Tel: +44 (0)7988 763254
    Email: [email protected]