
Overview
Available
Lovingly maintained, Scottish built motorsailer.
Lying: Argyll, United Kingdom
General Information
Manufacturer/Model | Millers of St. Monance 36' Ketch |
Name | REBECCA |
Designer | James N Miller |
Year | 1971 |
Category | Sail |
New or Used | Used |
Sale Status | Available |
Price | £65,000 |
Lying | Argyll, United Kingdom |
Reference | 2320982 |
Specifications
LOA | 10.9728m |
Beam | 3.3528m |
Draft | 1.5m |
Hull Construction | Carvel larch planking on oak frames |
Propulsion
Engine | Cummins 4BT marine diesel engine 155hp 4 Cylinder, turbo charger, indirectly cooled. PRM hydraulic reversing gearbox Engine panel with RPM, Water temp, Oil pressure and voltage Single lever morse controls |
Fuel | diesel |
Fuel Capacity | 680l |
Max Speed | 13.89kph |
Accommodation
Drinking Water Capacity | 529l |
Description
The yard of James N Miller of St. Monance in Fife, Scotland was at one time synonomus with the building and repair of all shapes and sizes of commercial and leisure craft. In business for 250 years the company diversified into the production of a range of leisure craft in the late 1950’s all produced along the lines of a traditional Scottish MFV, built to a yacht finish. At one stage more than 25 new leisure craft ranging from 28’ – 43’ were being launched annually.
A 36’ ketch rigged example of the builders range REBECCA has benefitted from significant investment in the current ownership. Launched in the early summer of 2022 after an enforced two year lay-up she is freshly painted and offered for sale with a comprehensive inventory including:
Larch planking over oak structural timbers.
Significant replanking undertaken on port and starboard sides around deck edge.
Keel bolts all replaced with new items in 2010
Cummins 4BT marine diesel engine, 155hp
Fuel tanks removed in 2018/19, drained, cleaned, pressure tested and painted
4 blade, bronze propellor. Rope Cutter.
12VDC onboard power system
230VAC shore power system
Victron Centaur battery charger
Victron BMV-712 battery monitor (2021)
Plotter/Radar – Raymarine C120 Classic MFD
Wind – Raymarine i60 system
GRP – Furuno GP32
DSC VHF – Icom IC-M412
REBECCA is lying afloat on a mooring and available for immediate viewing by prior appointment.
CONSTRUCTION
Hull Construction:
Traditional Scottish style MFV hull design
Straight, raked, soft nose stem and cruiser stern
Full length timber keel
Scantlings to fishing boat standards.
Larch planking over oak structural timbers.
Oak frames, beams, deadwood, stern and stemposts etc
Timber bilge keels
Significant replanking undertaken on port and starboard sides around deck edge.
Keel bolts all replaced with new items in 2010
Deck & Superstructure Construction:
Oak deck beams
Deck and superstructure constructed of marine plywood
Teak laid decks to finish side decks and foredeck
Section of decking aft of cockpit lifted and replaced.
New Oak Samson posts fitted forward and aft
Coachroof and wheelhouse roof finished with treadmaster panels.
Alloy framed windows in wheelhouse
Bronze portlights in coachroof sides
Keel & Rudder:
Full length wooden keel
Steel plate rudder
MACHINERY
Engine:
Cummins 4BT marine diesel engine
155hp
4 Cylinder, turbo charger, indirectly cooled.
PRM hydraulic reversing gearbox
Engine panel with RPM, Water temp, Oil pressure and voltage
Single lever morse controls
SeaFire engine space fire suppression system
Maintenance & Performance:
Engine last serviced Autumn 2019, boat not launched 2020/21
Cruising speed under engine 7.5kts @1,800rpm
Engine remove from engine space in 2018/19 and new engine mounts fitted.
Propulsion & Steering:
Stainless steel prop shaft
Traditional compression type stuffing gland
4 blade, bronze propellor
Rope Cutter
Single station wheel steering, cable driven
Tiller for use in cockpit
Autopilot:
Autohelm ST4000+ autopilot system
Autohelm wheeldrive unit
ELECTRICAL SYSTEMS
Voltage systems:
12VDC onboard power system
230VAC shore power system
Shore Power:
Single 16 amp connection
Extension lead to connect to shore supply
Hardwired system with RCD protection
Double 3pin 13 amps socket, battery charger, water heater and microwave
Battery Banks:
Engine Battery – 1x 12VDC, 115Ah, lead acid
Domestic Battery – 3x 12VDC, 115Ah, lead acid
Battery Charger:
Victron Centaur battery charger
230VAC – 12VDC, 30amp
Battery Monitoring:
Victron BMV-712 battery monitor (2021)
General:
Windscreen Wipers – On both starboard forward facing wheehouse windows
12VDC USB charging sockets
PLUMBING
Fresh Water:
Pressurised hot and cold water system.
Mixer tap
Jabsco Aquafilter system
Hot water provide by calorifier, heated by engine cooling water or 230VAC immersion heater
Bilge Pumps:
Manual bilge pump – Whale double action pump in cockpit
Electric bilge pump – x3, forward, midship and engine space. All with auto or manual switching
TANKAGE
Fuel:
Twin diesel tanks
Tanks removed in 2018/19, drained, cleaned, pressure tested and painted
Approximate total capacity 180gal (818ltrs)
Fresh Water:
Single fresh water tank.
Approximate capacity 140gla (636ltrs)
NAVIGATION & COMMUNICATION EQUIPMENT
In Wheelhouse:
Plotter/Radar – Raymarine C120 Classic MFD
Wind – Raymarine i60 system
GRP – Furuno GP32
Communications Equipment:
DSC VHF – Icom IC-M412
SSB – Yaesu FT-900 with matched aerial
DOMESTIC EQUIPMENT
Galley:
Galley Stove – Force 10 galley range, two burner and oven
Microwave oven – 230VAC
Fridge – Coolmatic front loading fridge, located in wheelhouse
Stainless steel sink
Heads:
Jabsco manual marine toilet
Stainless steel sink
Mixer tap with pull out shower head
Heating:
Webasto AirTop 3500 diesel fired blown air heater
Insulated ducting
Outlets in forward cabin, saloon, heads and wheelhouse
Thermostatic cabin controller
Lighting:
Overhead lighting throughout interior
Bulkhead mounted reading lights in saloon and forecabin
Entertainment:
Sony radio (FM&LW)/cd player
Speakers in wheelhouse
ACCOMMODATION
Summary of Accommodation:
Double cabin forward
Heads
Saloon with up to three occasional berths
Wheelhouse
Accommodation Finish:
Joinery work throughout of mahogany finished in a satin varnish
Bulkheads finished with T&G style mahogany planking
Hull sides painted out in white
Mahogany sole boards
Description of Accommodation from Forward:
Forward Cabin:
Twin cabin with two single bunks outboard port and starboard.
Bunks fitted with lee boards.
Timber built storage shelves running length of bunks overhead.
Selection of storage drawers and lockers beneath bunks
Access to chain locker forward
Saloon:
Hanging locker forward to starboard.
Bench settee along port side of saloon
Adjustable height saloon table to starboard with forward and aft facing seats
Port settee converting to single berth
Starboard side converting to compact double berth with table dropped down
Cave lockers behind settee back to port
Lockers above seating outboard to starboard
Galley:
To starboard aft of saloon.
Worktop with inset sink outboard.
Gas galley stove aft
Lockers below worktop and above worktop outboard
Heads:
Opposite galley to port.
Forward facing manual marine toilet mounted aft
Counter top outboard with inset stainless steel wash hand basin
Lockers below counter top
Wheelhouse:
Helm station to starboard forward with helmsmans seat.
Storage lockers within seat bases
Nav station to port forward with chart table and navigators seat.
Navigation instruments fitted across front end of wheelhouse.
DECK EQUIPMENT
Rig:
Deck stepped mast head ketch rig.
Both mast single spreader
All masts of anodised alloy construction
Standing rigging of stainless steel
Rotostay furling gear on forestay for genoa
Slab reefing mainsail and mizzen sail
Winches:
Sheet Winches – 2x Lewmar 8 single speed
Main Mast Mounted Halyard Winch
Sails:
Genoa – Roller reefing
Mainsail
Mizzen
Anchoring & Mooring:
Bower Anchor – Bruce 30kg anchor on 60m chain rode
Kedge Anchor – 35lb CQR anchor / Danforth. Chain and warp rodes for both.
Electric Anchor Windlass – Lofrans Tigress 1200w windlass handheld contro, remote control at helm station in wheelhouse
Mooring Warps - Selection
Fenders – Selection
General:
Custom made stainless steel bow sprit with integrated pulpit rail
Solid stainless steel bob-stay
Stainless steel bow roller for mooring
Stainless steel bow roller for anchor
Deck mounted stanchions supporting double tier stainless steel guardwires
Guardwire gates port and starboard
Samson posts port and starboard on fdoredeck
Grabrails on port and starboard edges of coachroof and wheelhouse
Cockpit with mahogany coamings
Folding cockpit table
Samson posts port and starboard aft
SAFTEY EQUIPMENT:
General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.
Navigation Lights:
Steaming light
Navigation lights
Anchor light
Life saving:
Lifesling MOB recovery system
Gas alarm system with Pilot gas valve controller
DISCLAIMER
In this case we are acting as brokers only.
The Owner is not selling in the course of a business. whilst every care has been taken in their preparation , the correctness of these particulars is not guaranteed. The Purchaser is strongly advised to check the particulars and where appropriate at their expense to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability for such engine on our part.
This vessel is offered subject to prior sale, price change, or withdrawal without notice
Millers of St. Monance 36' Ketch
£65,000
Lovingly maintained, Scottish built motorsailer.
Lovingly maintained, Scottish built motorsailer.
Lying: Argyll, United Kingdom
View all Photos
Download PDF
Enquire about this Boat
Available to view by appointment.
Please note all our listed yachts are privately owned and located in the owner's home port or marina. Due to the varying geographical marina locations of our yachts and the subsequent travel time and distances involved, please only make travel arrangements to view if actively considering purchase.
Office Hours Mon- Fri 08.30 – 18.00
Saturday & Sunday by prior appointment
For more information or to arrange an appointment please contact Mark Cameron Yachts
Tel: +44 (0)7988 763254
Email: [email protected]